Image Level Adjustment - Eiki LC-SD10 Owner's Manual

Video Input

Image Level Adjustment

1
Press MENU button to display the On-Screen Menu.
Point 7 8 buttons to move the red frame pointer to IMAGE
ADJUST Menu icon.
2 Press Point d button to move the red frame pointer to the item
that you want to adjust and then press SELECT button. The
level of each item is displayed. Adjust each level by pressing
Point 7 8 buttons.
Contrast
Press Point 7 8 buttons to adjust the image contrast
Brightness
Press Point 7 8 buttons to adjust the image brightness. (From 0 to 63.)
Color
Press Point buttons to adjust color intensity. (From 0 to 63.)
7 8
Tint
Press Point 7 8 buttons to obtain proper color
Color temp.
Press Point 7 8 buttons to select the Color temp. level that you
want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press Point 7 8 buttons to adjust the red tone. (From 0 to 63.)
White balance (Green)
Press Point buttons to adjust the green tone. (From 0 to 63.)
7 8
White balance (Blue)
Press Point 7 8 buttons to adjust the blue tone. (From 0 to 63.)
Sharpness
Press Point 7 8 buttons to adjust the image sharpness. (From 0 to 15.)
Gamma
Press Point buttons to obtain better balance of contrast. (From 0
7 8
to 15.)
34
Press
. (From 0 to 63.)
. (From 0 to 63.)
IMAGE ADJUST MENU
Move the red frame point-
er to the item to be select-
ed and then press SELECT
button.
Press Point
to adjust value.
Press SELECT button at this
icon to display other items.
Press Point 7 8 buttons
to adjust value.
Press SELECT button at this icon
to store the value.
NOTE : Tint cannot be adjusted when the video
system is PAL, SECAM, PAL-M or PAL-
N.
Image Adjust
Menu
7 8 buttons