Table of Contents
Advertisement
Positioning the Projector
– This projector is designed to project on a flat projection surface.
– The projector can be focused from 4.3'(1.3m) to 21.3'(6.5m).
– Refer to the figure below to adjust a screen size.
A : B = 9 : 1
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (min)
Zoom (max)
Adjustable Feet
Picture tilt and projection angle can be adjusted by rotating the
adjustable feet. Projection angle can be adjusted at 8.0 degrees.
1
Lift the front of the projector and pull the feet lock latches on
the both sides of the projector.
2
Release the feet lock latches to lock the adjustable feet and
rotate them to adjust position and tilt.
3
To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
☞
by Menu Operation. (
CAUTION
Tilt the projector within the adjustable angle not to shorten the lamp life.
Proper angle should be taken.
16.1' (4.9m)
10.6' (3.2m)
4.3' (1.3m)
100"
40"
34"
34"
40"
691 x 518
813 x 610
4.3' (1.3m)
4.9' (1.5m)
4.3' (1.3m)
–––––
P20 and P36 )
Note:
The brightness in a room has a great influence on picture
quality. It is recommended to limit ambient lighting in order
to provide the best image.
21.3' (6.5m)
150"
127"
83"
100"
150"
2032 x 1524
3048 x 2286
12.5' (3.8m)
19.0' (5.8m)
10.6' (3.2m)
16.1' (4.9m)
Adjustable Feet
Preparation
200"
Max. Zoom
169"
A
Min. Zoom
Center
B
200"
4064 x 3048
–––––
21.3' (6.5m)
Feet
Lock
Latches
13
Advertisement
Table of Contents
