Image Level Selection - Eiki LC-SD10 Owner's Manual

Image Level Selection

Direct Operation
Select image level among Standard, Cinema, Image 1, Image 2,
Image 3 and Image 4 by pressing IMAGE button on the remote
control.
Standard
Normal picture adjustment preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Image 1~4
User preset picture adjustment in Image Adjust Menu (
Menu Operation
1
Press MENU button to display the On-Screen Menu. Press
Point 7 8 button to move the red frame pointer to Image Select
Menu icon.
2 Press Point d d button to move the red frame pointer to the level
that you want to set and then press SELECT button.
Standard
Normal picture adjustment preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Image 1~4
User preset picture adjustment in Image Adjust Menu (
☞
P34-35 ).
IMAGE SELECT MENU
The level being selected.
☞
P34-35 ).
Video Input
IMAGE button
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Image Select
Menu icon
Move the red frame pointer to the
level and press SELECT button.
33