Table of Contents
Advertisement
8.0
INSTALLATION NOTE
To protect the front polarizer from accidental damage it is highly recommended that the LCD be mounted
behind a clear glass or polycarbonate window material. It is also recommended that an air gap of at least .030"
to .050" minimum be provided between the window material and the surface of the LCD to prevent the transfer
of static charges to the front surface of the LCD. Supertwist LCD's may activate un–driven elements in
response to a surface static charge on the front polarizer. It may take several minutes for such a surface static
charge to dissipate.
9.0
ACCESSORIES
5 Volt Input EL Backlight Inverter
Power/Data Connector Only (26 pin)
Keyed Power/Data Connector with cable
Double ended keyed Power/Data cable(26 pin)
(XX = length in inches of cable)
(Standard cables are 18 and 36 inches)
Industrial Electronic Engineers, Inc.
Van Nuys, California
46013–01
30554–99
30554–XX
30553–XX
SIZE
CODE IDENT
A
NO.
05464
Scale: NONE
Rev C
S03858–06–0105
Sheet 23
Advertisement
Table of Contents
