Table of Contents
Advertisement
If the image is flickering or
u n s t a b l e f o r a c o m p u t e r
connection:
If the remote control does not
operate:
- Press the Resync button.
- Press MENU, go to Picture > VGA settings, and
adjust Frequency or Tracking.
- Be sure nothing is blocking the remote control
receiver on the front or back of the projector. Use
the remote control within the effective range.
- Aim the remote control at the screen or at the front
or back of the projector.
- Move the remote control so it is more directly in
front of or behind the projector and not as far to the
side.
EN-33
Advertisement
Table of Contents
