The Found New Hardware Wizard or Add Hardware Wizard screen appears ...
>
On-Screen Manual
Scanning Guide
Add Hardware Wizard screen appears when the scanner is connected to a computer
The Found New Hardware Wizard or Add Hardware Wizard
screen appears when the scanner is connected to a computer
Check: The machine may have been connected before installing the
software programs from the Setup CD-ROM
Disconnect the USB cable from the computer, then click Cancel in the Found New Hardware Wizard or
Add Hardware Wizard screen to close it. Then install the software programs from the Setup CD-ROM
>
>
Installation Problems
Troubleshooting
> The Found New Hardware Wizard or
.
Sayfa 230 / 268 sayfa
.
Page top