Usage Of The Detergent - Haier HWM120-01 User Manual

3 Usage of the detergent

Inlet of the concentrated synthetic detergent
How to use the washing powder
First turn the detergent box down before adding detergent.
Add the concentrated composite washing powder into the box
directly as indicated in the left figure.
See to following table for water level, water quantity and
selection of powder.
How to use the whitener
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
The instant dissolving of the washing powder:
1. Prepare warm water of 30
2. Add the powder while stirring to fully dissolve it.
The powder is more prone to pollute the laundries than
the detergent. Therefore please use it with proper quantity.
It is suggested not to use high sudsing detergent.
Washing power with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
and a container.