Using The Remote Mouse Control - ViewSonic PJD5223 User Manual

Video/Page Up
15
Switch input source to Composite/
S-Video by sequence.
Perform page up function when
mouse mode is activated.
VGA2
16
Display COMPUTER IN 2 signal.
ESC/Page Down
17
Goes back to previous OSD menu.
Perform page down function when
mouse mode is activated.
Enter
18
Confirmed selections.
Right/ Lock
19
Activate panel key lock.
Magnify
20
Magnifies or reduces the projected
picture size.
Volume
21
Adjust the volume level.
Mute
22
Cut off the sound temporarily.
Aspect
23
Select the display aspect ratio.

Using the remote mouse control

The capability of operating your computer
with the remote control gives you more
flexibility when delivering presentations.
1. Connect the projector to your PC or
notebook with a USB cable prior to
using the remote control in place of
your computer's mouse. See
"Connecting a computer" on page 16
for details.
2. Set the input signal to COMPUTER IN
1 or COMPUTER IN 2.
3. Press Mouse on the remote control to
switch from the normal mode to the
mouse mode. An icon appears on the
screen to indicate the activation of the
mouse mode.
4. Perform the desired mouse controls on
your remote control.

To move the cursor on the screen,
press /

To left-click, press

To right-click, press

To drag-and-drop, press and hold
Enter, press
drag. When it is where you want it,
press Enter again.

To operate your display software
program (on a connected PC)
which responds to page up/down
commands (like Microsoft
PowerPoint), press Page Up/Page
Down.

To return to the normal mode,
press Mouse again or other keys
except for the mouse related multi-
function keys.
12
/ / .
.
.
/ / / to
EN-12