Using The Remote Mouse Control - ViewSonic Pro8500 User Manual

Enter/ Left mouse
17
Confirmed selections.
Perform the left button of the
mouse when mouse mode is
activated.
Right/ Lock
18
When the On-Screen Display
(OSD) menu is activated, the #4,
#5, and #18 keys are used as
directional arrows to select the
desired menu items and to make
adjustments.
Activate panel key lock.
ESC/ Right mouse
19
Leave current page or items or to
close OSD.
Perform the right button of the
mouse when mouse mode is
activated.
Volume
20
Adjust the volume level.
Lamp Off/On
21
Turn off or on the lamp power.
P-Timer
22
Activate P-Timer OSD menu.
Aspect
23
Select the display aspect ratio.
Freeze
24
Press "Freeze" to pause the
screen image. Press again to
cancel the freeze function.
Light
25
Enable backlight functions of the
remote control's buttons.
ViewSonic Pro8500

Using the remote mouse control

The capability of operating your computer
with the remote control gives you more
flexibility when delivering presentations.
1. Connect the projector to your PC or
notebook with a USB cable prior to
using the remote control in place of
your computer's mouse. See
"Connecting a computer" on page 18
for details.
2. Set the input signal to Computer in 1
or Computer in 2.
3. Press Mouse on the remote control to
switch from the normal mode to the
mouse mode. An icon appears on the
screen to indicate the activation of the
mouse mode.
4. Perform the desired mouse controls on
your remote control.
To move the cursor on the screen,
press /
To left-click, press
To right-click, press
To drag-and-drop, press and hold
Enter, press
drag. When it is where you want it,
press Enter again.
To operate your display software
program (on a connected PC)
which responds to page up/down
commands (like Microsoft
PowerPoint), press Page Up/Page
Down.
To return to the normal mode,
press Mouse again or other keys
except for the mouse related multi-
function keys.
/ / .
.
.
/ / / to
14