Using The Remote Mouse Control - ViewSonic PJD5234 User Manual

28. Aspect
Select the display aspect ratio.
29. Timer
Activate P-Timer OSD menu.

Using the remote mouse control

The capability of operating your computer with the remote control gives you more
flexibility when delivering presentations.
1. Connect the projector to your PC or notebook with a USB cable prior to using the
remote control in place of your computer's mouse. See
on page 13 for details.
2. Set the input signal to COMPUTER IN 1 or COMPUTER IN 2.
3. Press Mouse on the remote control to switch from the normal mode to the mouse
mode. An icon appears on the screen to indicate the activation of the mouse
mode.
4. Perform the desired mouse controls on your remote control.
• To move the cursor on the screen, press /
• To left-click, press
• To right-click, press
• To operate your display software program (on a connected PC) which responds
to page up/down commands (like Microsoft PowerPoint), press Page Up/Page
Down.
• To return to the normal mode, press Mouse again.
.
.
9
"Connecting a computer"
/ / .