Connecting The Thumbscrew Cables - Sharp XV-Z10000UL Operation Manual

Connecting the Projector to Other Devices
Connecting to a Com-
puter Using a DVI
Cable (Sold Separately)
Connect the projector to the com-
puter using the DVI cable.
Note
• Switch the signal type to either "A.RGB"
or "D.PC RGB" depending on whether the
computer output signal is analog or digi-
tal. See page 65.

Connecting the thumbscrew cables

I Connect the thumbscrew cable making sure that it fits cor-
rectly into the terminal. Then, firmly secure the connec-
tors by tightening the screws on both sides of the plug.
I Do not remove the ferrite core attached to the RGB cable.
"Plug and Play" function
I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
I Before using the "Plug and Play" function, be sure to turn on the projector first and the connected
computer last.
Note
• The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
-22
Optional
accessory
To DVI Digital output terminal
Desktop computer
DVI cable
(sold separately)
DVI cable
Type:AN-C3DV
(9'10'' (3.0m))
Ferrite core