Vectra Product Hardware Comparison - HP Vectra VEC 7 Supplementary Manual

Component
Microprocessor Intel Pentium MMX (socket 7), 166,
200, or 233 MHz
16 KB of level-1 cache memory,
256 KB of level-2 cache memory
(integrated on the system board)
Chipset SiS5581
Super I/O NS87317
Memory Up to 192 MB SDRAM
Hard Disks 2.1 or 3.2 GB Ultra ATA SMART II
Flexible disk Standard version without bezel
drive
CD-ROM 24XMAX IDE
(selected
models)

Vectra Product Hardware Comparison

The main feature differences between the two products are shown in bold.
HP Vectra VE 4/xxx PC
Vectra Product Hardware Comparison
HP Vectra VE 7/xxx PC
Intel Celeron for Slot 1, 266 or
300 MHz
32 KB of level-1 cache memory,
0 KB of level-2 cache memory (based on
the same P6 microarchitecture as
Pentium II processors)
Intel 440EX AGPset (based on Intel
440LX chipset but for the Celeron
processor) with 66 MHz system bus.
AGP-enabled (Accelerated Graphics
Port) for enhanced graphics performance
in Intel Celeron-based systems
ACPI (Advanced Configuration and
Power Interface) support
Ultra ATA (on Primary and Secondary
IDE channels)
SDRAM memory allows real-time data
transfer from the processor, eliminating
bottlenecks and improving overall
system performance
NS309
32 MB (standard), 256 MB (maximum),
60 ns SDRAM, two DIMM sockets (non-
ECC)
2.5 or 3.2 GB Ultra ATA SMART II
Standard version with bezel (desktop
and minitower)
32XMAX IDE (without audio jack and
volume control switch)
3