Hw Monitor Configuration; Anti Surge Support; Boot Menu - Asus M4A78L-M - Motherboard - Micro ATX User Manual

Power on From S5 By RTC Alarm [Disabled]
Enables or disables RTC to generate a wake event. Configuration options: [Disabled]
[Enabled]
2.5.5

HW Monitor Configuration

CPU Temperature [xxxºC/xxxºF] or [Ignored]
MB Temperature [xxxºC/xxxºF] or [Ignored]
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Fan Speed [N/A], [xxxxRPM], or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU fan speeds in
rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows
N/A. Select [gnored] if you do not want the detected speed to be displayed.
CPU Q-Fan Control [Disabled]
Enables or disables the ASUS Q-Fan feature that smartly adjusts the CPU fan speeds for
more efficient system operation. Configuration options: [Disabled] [Enabled]
Chassis Fan Speed [N/A], [xxxxRPM], or [Ignored]
The onboard hardware monitor automatically detects and displays the Chassis fan speeds in
rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows
N/A. Select [gnored] if you do not want the detected speed to be displayed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xx.xxxV] or [Ignored]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators.
2.5.6 Anti Surge Support [Enabled]
Enables or disables the Anti Surge feature. Configuration options: [Enabled] [Disabled]
2.6

Boot menu

The Boot menu items allow you to change the system boot options. Select an item then
press <Enter> to display the submenu.
Main Advanced
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
ASUS M4A78L-M
BIOS SETUP UTILITY
Power Boot Tools Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
2-17