Loading Originals; Loading The Original Into The Adf; Placing The Original On The Original Glass - Konica Minolta bizhub 552 User Manual

2.2

Loading originals

2.2 Loading originals
Place the original in the ADF or on the Original Glass. Select the optimal position for setting the original ac-
cording to the type of the original to be copied.
- By using the ADF, a multi-page original can be fed automatically one page at a time. The ADF can also
be used to automatically scan 2-sided originals.
- When you are using the Original Glass, place the original directly on the Original Glass to scan. This
method is suited for originals in the form of a book and the like that cannot be fed through the ADF.

Loading the original into the ADF

1
Slide the Lateral Guide to fit the size of the original.
2
Load the original face up in the Original Tray and arrange accord-
ing to the scanning order.
% Place the original pages so that the top of the original is to-
ward the back side of the machine.
% Do not stack originals exceeding the , mark.
% If the original is loaded in any orientation other than with the
top of the original toward the back of the machine, be sure to
select the original orientation.
3
Slide the adjustable Lateral Guide against the edges of the orig-
inal.

Placing the original on the Original Glass

1
Lift open the ADF 15 degrees or more.
% Unless you lift the ADF more than 15 degrees to open it, the correct document size may not be de-
tected.
2
Place the original face down on the Original Glass.
% Place the original pages so that the top of the original is to-
ward the back or the left side of the machine.
% Align the original with the mark in the back-left corner of the
Original Scale.
% For transparent or translucent originals, place a blank sheet of
paper of the same size as the original over the original.
3
Close the ADF.
d
Reference
For details on originals that cannot be placed on the original glass or loaded into the ADF, refer to the [User's
Guide Copy Operations].
bizhub 652/552
2
2-13