Asus Ez Flash 2 Utility - Asus M2N68-AM SE2 - Motherboard - Micro ATX User Manual

Updating from a BIOS file
a. Select Update BIOS from a file, then click Next.
b. Locate the BIOS file from the Open window, then click Open.
3. Follow the onscreen instructions to complete the updating process.
2.1.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Download the latest BIOS file from the ASUS website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to a USB port, then launch
EZ Flash 2 in either of the following ways.
• Press <Alt> + <F2> during POST to display the following:
FLASH TYPE:
BOARD:
VER:
DATE:
PATH: A:\
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move[B] Backup
• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
2. Press <Tab> to locate the correct file. Press <Enter>.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
• Only a USB flash disk with FAT 32/16 format and single partition supports the ASUS EZ
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
2-2
ASUSTek EZ Flash 2 BIOS ROM Utility V3.34
MXIC 25L8005
Current ROM
M2N68-AM SE2
0207 (H:00 B01)
01/07/2009
Flash 2 utility.
failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Esc] Exit
ASUS M2N68-AM SE2