Installing A Processor; Lift The Socket Lever - Intel BOXD5400XS Product Manual

Installing a Processor

Instructions on how to install processors on the Desktop Board are given in the
following section.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure AC power has been removed by
unplugging the power cord from the computer. The standby power indicator should
not be lit (see Figure 4 on page 24). Failure to follow these precautions could result in
damage to the processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 29.
2. Open the socket lever by pushing the lever down and away from the socket
(Figure 9, A and B).
Installing and Replacing Desktop Board Components
Figure 9. Lift the Socket Lever
33