Intel Desktop Board D5400XS Product Guide
Fan Headers
The function/operation of the fans is as follows:
•
The fans are on when the computer is in the ACPI S0 state.
•
The fans are off when the computer is in the ACPI S3, S4, or S5 state.
•
Each fan header is wired to a tachometer input of the hardware monitoring and
control device.
•
All fan headers support closed-loop fan control that can adjust the fan speed or
switch the fan on or off as needed.
•
All fan headers have a +12 V DC connection.
The Desktop Board has two 4-pin processor fan headers, one 4-pin and two 3-pin
chassis fan headers, one 3-pin MCH fan header, and one 3-pin DIMM cooling fan
header.
LAN Wake Capabilities
CAUTION
For LAN wake capabilities, the 5 V standby line for the power supply must be capable
of delivering adequate +5 V standby current. Failure to provide adequate standby
current when using this feature can damage the power supply.
LAN wakeup capabilities enable remote wake-up of the computer through a network.
The LAN subsystem monitors network traffic and upon detecting a Magic Packet*
frame, it asserts a wake-up signal that powers up the computer.
22