Processors; Main Memory - Intel BOXD5400XS Product Manual

Processors

CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 4 pin)
power connectors to the Desktop Board may result in damage to the board, or the
system may not function properly.
Desktop Board D5400XS supports two Intel processors in the LGA771 package.
Processors are not included with the Desktop Board and must be purchased
separately.
Related Links
Go to the following page or link for more information about:
• Instructions on installing or upgrading the processor, page 33 in Chapter 2
• Supported processors for Desktop Board D5400XS,
http://www.intel.com/products/motherboard/

Main Memory

NOTE
To be fully compliant with all applicable Intel
board should be populated with FBDIMMs that support the Serial Presence Detect
(SPD) data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The Desktop Board features the following:
• Four 240-pin DDR2 SDRAM FBDIMM sockets with gold-plated contacts
• 800/667 MHz DDR2 SDRAM interface
• DIMM cooling fan header
The Desktop Board supports the following memory:
• 800/667 MHz Fully Buffered DDR2 DIMMs only
• Up to 4 GB utilizing 512 Mb or 1 Gb technology
• Up to 16 GB utilizing 1 Gb technology
• Serial Presence Detect (SPD) memory only
NOTE
A DIMM cooling fan is recommended for use on Desktop Board D5400XS. Refer to
"Installing a DIMM Cooling Fan" on page 41 in Chapter 2 for more information.
Desktop Board Features
®
SDRAM memory specifications, the
13