Gigabyte GA-7TESM User Manual page 27

15 ) BAT (Battery)
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
16 ) IPMB1 (IPMB Type A connector)
CAUTION
 Danger of explosion if battery is incorrectly
replaced.
 Replace only with the same or equivalent
type recommended by the manufacturer.
 Dispose of used batteries according to the
manufacturer's instructions.
1
Pin No.
1
2
3
2 7
Connector Introduction
Definition
IPMB_SMBCLK
GND
IPMB_SMBDAT