Apm Configuration - Asus M2N 1394 User Manual

2.5.5

APM Configuration

APM Configuration
Power Button Mode
Restore on AC Power Loss
Power On By PCI Device
Power On By PCIE Device
Power On By LAN(MAC)
Power On By Ring
Power On By PS/2 KB/MS
Power On By USB
Power On By RTC Alarm
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power
button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PCIE Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through
a PCIE LAN or modem card. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By LAN (MAC) [Disabled]
This parameter allows you to enable or disable LAN(MAC) to generate a
wake event.
Configuration options: [Disabled] [Enabled]
Power On By Ring [Disabled]
This parameter allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
-30
[On/Off]
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Chapter : BIOS setup