Apm Configuration - Asus KFSN4 DRE IKVM - Motherboard - SSI EEB 3.61 User Manual

4.4.7

APM Configuration

This sub-menu allows you to change Advanced Power Management (APM)
features. Select an item then press <Enter> to display the configuration options.
Advanced
APM Configuration
Restore On AC Power Loss
Resume by Ring
Resume by PCIE Wake#
Resume by RTC
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume By Ring [Disabled]
When set to [Enabled], the system will generate a wake event when the external
modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume By PCIE Wake# [Disabled]
When set to [Enabled], the system enables the PME to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume by RTC [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]
4-24
BIOS SETUP UTILITY
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
[Last State]
[Disabled]
[Disabled]
[Disabled]
Options
Power Off
Power On
Last State
Select Screen
→←
Select Item
↑↓
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup