Table of Contents
Advertisement
4.4.1
JumperFree Configuration
The items in this menu allow you to configure the system frequency/
voltage.
Config System Frequency/Voltage
CPU Frequency MHz
CPU1 DDR2 Voltage
CPU2 DDR2 Voltage
1.4V Chipset Voltage
1.5V Chipset Voltage
CPU1 Voltage Control
CPU2 Voltage Control
Hyper Transport Voltage
CPU Frequency MHz [200.9]
Allows you to select the CPU frequency. The values range from 200.9 to
300. Refer to the table on the next page for the correct Front Side Bus and
CPU External Frequency settings. Configuration options: [200.9] [201.0]
[201.5] [202.0] [202.5] [203.0] [203.5] [204.0] [204.5] [205.0]
[205.5] [206.0] [206.5] [207.0] [207.5] [208.0] [208.5] [209.0]
[209.5] [210.0]
Selecting a very high CPU frequency may cause the system to become
unstable! If this happens, revert to the default setting.
CPU1/CPU2 DDR2 Voltage [1.80V]
Allows you to set the DDR2 operating voltage. Set to Auto for safe mode.
Configuration options: [Auto] [1.70V] [1.80V] [1.90V] [2.00V]
Refer to the DDR2 documentation before setting the memory voltage.
Setting a very high memory voltage may damage the memory
module(s)!
ASUS KFN32-D SLI Series
[200.9]
[1.80V]
[1.80V]
[1.45V]
[1.50V]
[Default VID]
[Default VID]
[1.20V]
Adjust CPU1 DDR2
Voltage
4-19
Advertisement
Table of Contents
