Table of Contents
Advertisement
–
Tap Headset again to de-activate the Bluetooth headset. The
green line disappears when the Headset is inactive.
•
Speaker: routes the phone's audio through either the speaker or
through the earpiece.
–
Tap Speaker to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
displays under the Speaker button.
–
Tap Speaker again to use the phone's earpiece (see "Using
the Speakerphone During an Active Call" on page 58). The
green line disappears when the Speaker is inactive.
•
Press
for more options:
–
Contacts: allows you to go to your Contact list.
–
Message: allows you to create a text message during a call.
–
Memo: allows you to jot down a memo during a call.
–
Noise Reduction On/Off: allows you to turn on the Noise
Suppression feature when you are in a noisy area. Turn it Off
when not needed to conserve battery power.
–
My call sound: assigns a sound preset for use during an active
call. Sometimes you might need the sound to be softer, clearer,
or optimized for one ear or the other.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap Hold
current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
Unhold
To make a new call while you have a call in progress
1. Tap Hold
.
Hold
2. Tap Add call
to display the dialer.
3. Enter the new number and tap
Once connected, the active call displays in a large box
at the top of your screen and the call on hold displays
in a smaller box in the middle of your screen.
. This action places the
Hold
.
Call Functions
56
Advertisement
Table of Contents
