Table of Contents
Advertisement
In-Call Options
During an active call there are several options available by
touching a corresponding on-screen button.
•
end call: Terminates the call.
•
dialer
: Displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
•
speaker: Routes the phone's audio through either the speaker or
through the earpiece. Touch speaker to turn on the speakerphone.
Touch again to turn it off.
•
mute: Turn the onboard microphone either on or off. Touch to
mute your phone during a call. Touch again to unmute.
•
hold: Puts a call on hold. Touch to put the present call on hold.
Touch again to reconnect.
•
bluetooth: This option appears if a Bluetooth device is active.
Touch to activate the Bluetooth device.
•
add call: Allows you to add another call to your present
conversation. For more information, refer to "3-Way
(Multi-Party) Calling" on page 43
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress, if your network supports this service.
1. While on a call, touch hold.
The hold icon changes colors. This action places the
current caller on hold.
2. You can later reactivate this call by touching hold
again.
Making a New Call During a Call in Progress
1. Touch add call.
The history screen displays.
2. Select a number from your recent calls, or touch
keypad
to dial a number.
You can also touch people
your contacts list. Enter the number to add and touch
.
call
Once connected, the active call appears on the call
screen and the call on hold appears in a box at the top
of the display.
to enter a number from
Call Functions
41
Advertisement
Table of Contents
