Using A Wall-Mount Bracket - Sony Bravia XBR-84X900 Operating Instructions Manual

3
Press F/f/G/g to select an item, then
press .
Follow the instructions on the screen.
~
• Home mode sets the TV to settings
optimized for home viewing.
4
Select Continue to scan for available
channels and enable the Rovi On
Screen Guide™ feature. If you receive
channels from a cable box or satellite
receiver and do not wish to use the TV's
built-in tuner, select Skip.
Selecting Skip will disable the Rovi On
Screen Guide feature, which is only
available when the TV's tuner is used.
~
• If you skip the channel scan while in the
setup menus, Rovi On Screen Guide will
be disabled.
5
Set up the Internet settings. Select Auto
to connect to the network automatically.
Select Custom to connect manually.
If you do not access the Internet, or to
set up later, select Skip.
~
• If you use WEP security, select Custom
t Wireless Setup t Scan. Then,
select the network name (SSID) you want
to connect. If you cannot find the
required network name, select [Manual
Entry] and press
name.
• Use the optional USB Wireless LAN
Adapter to connect with your wireless
router (or access point) at 5GHz. Insert
USB Wireless LAN Adapter and set
Standby for Wi-Fi Direct to Off. Press
HOME, then select Settings t Network
t Standby for Wi-Fi Direct t Off.
• To set Network Setup later, press
HOME, then select Settings t Network
t Network Setup.
30 US
to enter network
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Floor Stand is
attached to the TV, the TV may require
detaching the Floor Stand; see page 17
(Detaching the Floor Stand from the TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
you use the Wall-Mount Bracket designed
for your TV and the installation should be
performed by a Sony dealer or licensed
contractor.
• See page 5 (Compatible Wall-Mount
Bracket Information).
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set.
The supplied screws are designed so
that they are 8 mm to 12 mm in length
when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model. Use of screws other than
those supplied may result in internal
damage to the TV set or cause it to fall,
etc.
8-12 mm
Screw
(supplied with the
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of
TV set