Hunter 23869 Installation And Operation Manual page 6

Step 3-1
Square
Hanger
Motor
Assembly
Step 3-2
Step 3-3
#8-32 x 1" Screw
3 • Assembling and Hanging the Fan
3-1. Position the square hanger so that the green ground wire
attached to the square faces out of the large opening in the
metal bracket.
3-2. Holding the wires out of the way, lift the motor assembly and
place the square hanger into the opening in the ceiling plate.
metal bracket. Failure to do so could result in the fan falling.
3-3. Install two locking screws through the holes in the side of the
metal bracket to secure the square hanger.
Green
Ground Wire
Green
Ground Wire
42825-01 • 05/17/07 • Hunter Fan Company
WARNING: Make sure the square hanger can not rotate in the
Locking Screw
6