Hunter 23869 Installation And Operation Manual page 12

Type a models

Hide thumbs Also See for 23869:

7 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.)

7-6. To attach the lower switch housing, connect the upper plug

connector from the motor to the lower plug connector in the

lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together

one way. Make sure the connectors are properly aligned before

connecting them. Incorrect connection could cause improper

operation and damage to the product.

7-7. Place the lower switch housing assembly over the upper switch

housing. Align the side screw holes in the upper and lower switch

housings. Attach the lower switch housing to the upper switch

housing

7-8. To install each shade, first loosen the three thumbscrews.

7-9. Raise the shade to the light fixture. Tighten the thumbscrews

securely.

7-10.

Install candelabra base light bulbs (60 Watt maximum each).

Note: Glass shade style and number of lights may vary.

Thumbscrews

42825-01 • 05/17/07 • Hunter Fan Company

Plug

Connector

Lower

Switch

Housing

Plug

Connector

Detail

Steps 7-8 – 7-10

Steps 7-6 – 7-7

Housing

Assembly Screw

Shade

Bulb