Table of Contents
Advertisement
Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly loose
after screws are tightened. is is normal.
6-3. Remove the blade armature screws and rubber shipping bumpers
from the motor. Save the screws for the following step and discard
the shipping bumpers.
6-4. For each blade, insert one blade armature screw through the
blade iron, and attach lightly to the fan. Insert the second blade
armature screw, then securely tighten both armature screws.
41893-01 • 08/29/05
Blade
Armature
Screw
Step 6-4
6 • Assembling the Blades
Steps 6-1 – 6-2
Blade
Assembly
Screws
Hunter Fan Company
9
Advertisement
Table of Contents
