RocketFish RF-GXBX1202 Quick Setup Manual

Kinect™ Tripod Starter Kit
QUICK SETUP GUIDE
CAUTION:
RF-GXBX1202
• Do not disassemble any of the components. Refer all servicing to qualified personnel
only.
• Do not place or store the product in a humid area, and do not expose it to water or rain.
• Use the product only as instructed. Read all instructions before operating the product.
• Failure to follow these directions may void the warranty.
• Use this product for Xbox® 360™ Kinect™ only
• Don't lean on or put additional weight on the tripod stand.
Package contents:
Kinect USB extension cable
Required tools:
• Phillips screwdriver
Features
• Compatible with Xbox® 360™ Kinect™
• Kinect USB extension cable increases Kinect placement range
• Mini Kinect tripod for flexible placement of the Kinect in your playing space
• Kinect base attaches to the Mini Kinect tripod
Kinect base Mini Kinect tripod
Setting up your tripod
1 Screw the Kinect base onto the top of the tripod.
2 Adjust the screw beneath the tripod head to secure the Kinect base.