Removing An Optical Disc When Running On Battery Or External Power - HP Compaq NC2400 User Manual

Removing an optical disc when running on battery or
external power
1. Press the release button (1) on the drive bezel to release the media tray, and then gently pull out
the tray (2) until it stops.
2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE
3. Close the media tray and place the disc in a protective case.
ENWW
If the tray is not fully accessible, tilt the disc carefully as you remove it.

Removing an optical disc when running on battery or external power

13