Advertisement
After formatting is completed, the window below will be displayed.
Follow the instructions in this window, take out the Product from SD slot and insert it again.
Then click "OK".
[How to remove the Product]
Note: Please close the application software which is accessing to the Product before
take it out. Because, it is impossible to take the Product out during access to the
Product.
Now, the Product is reset to the factory default.
Before you take the product out, click the "Eject" button
] on the Product on the "DEVICE" item list in the
[
"Finder".
When there is no Product on the "DEVICE" item list, then
you are able to take the Product out.
10
Advertisement
