Advertisement
(1) Start mode Setting
FlashAir Setting: Start automatically at boot
This mode is set as the default setting.
The wireless LAN functionality of the Product will run automatically when the device which contains
the Product is turned on. "SSID" and "Password" setup on this window will be used for the FlashAir
Wireless LAN connection.
FlashAir Setting: Start with the control image
If this mode is selected, the wireless LAN functionality will not run automatically even if the device
which contains the Product is turned on.
The on-off operation for the wireless LAN functionality can be controlled by changing the status of
the JPEG file "FA000001.JPG" which is pre-written in the Product.
How to control the on-off operation with the digital still camera as an example:
The operation method varies by device. Please review your device manual.
Push "Play" button on the digital still camera and display the image below (FA000001.JPG).
Push the "Menu" button and select "Protect".
When the image above is unprotected, the wireless LAN
functionality is turned on.
To turn off the wireless LAN functionality, push "Menu"
5
Advertisement
