Hard Disk Drive Types - Epson Powerspan Desktop Product Information Manual

Video Memory, Modes, and Monitors
This system comes with 1MB of VRAM soldered on the main
system board. You can increase the video memory to 2MB by
installing eight VRAM ZIP chips (256KB
mode). You must fill all eight sockets.
The table below lists the video modes supported by the
system.
Resolutions and colors
I
(1) bpp=bits per pbel: 4 bpp=l6 colofs, 6 bpp=256 colors,
16 bpp=65,000 colors, 24 bpp~l6.7 mlson colors
(2) 32 MHz setting
(3) 40 MHz setting
(4) Interlaced
4, 60ns, fast-page
x
3/94
The table below lists the monitors that are directly supported
by the Mach32 accelerator.
Check the monitor documentation to see if its characteristics
match one of the listed types. If so, select that type in the
Mach32 installation program.
For EPSON monitors, see the second table for information on
the monitor type to select.
If the monitor does not match any of these types, set up a
custom monitor.
Mach32
monitor list
EPSON monitor types

Hard Disk Drive Types

This system comes with a hard disk auto-sensing feature.
Some drives do not support the auto-sensing feature. If the
system does not correctly define your hard disk drive, you
can define up to two drive types in SETUP.
EPSON PowerSpan DT
EPSON PowerSpan DT - 5