Epson ExpressStation Product Support Bulletin page 8

Q12. Where is the information stored?
It is saved in the computer's FLASH memory and a file called
A.
SYSTEM.SCI.
should not use the BIOS SETUP program. Always use the System
Configuration to configure your computer. The first time you configure
your computer, you must run the program from the Reference Diskette
and it is best to always run it from there. You can create an alternate SCI
file. Please refer to the Software Guide for details.
VIDEO
Q13. What type of video is included?
The controller is a WD90C30 graphics controller. There is 1MB of
A. VGA
video that comes standard. The last 512K of this 1 MB of video RAM
RAM
is socketed. This controller supports the following resolutions up to 1024
x 768 256 colors interlaced and non-interlaced. The 800 x 600 and
x
1024 x 768 refresh rates are controlled through setup. Please refer to your
monitor manual for the proper refresh rate.
In addition, there are two diskettes included which feature drivers for many
popular software programs and video utilities. Some of the drivers
included are Framework II, Gem 3.0 and 3.1, Lotus 1-2-3 Rel.
2.0, 2.01, 2.2/Lotus Symphony Rel. 1.1, 1.2, 2.0, Ventura Publisher 1.1 &
2.0, Windows 3.0, WordPerfect 5.0 & 5.1, AutoShade v1.x, Autocad
R9/R10 & release 11, Cadvance, Generic CADD, P-Cad, Versacad v5.3 &
5.4, Word 5.0/5.5, and MS OS2/1.21.
Utilities included are: VGAMODE, RAMBIOS.EXE, RAMBIOS.SYS,
RWS.EXE and SS.EXE ( Western Digital's screen saver utility).
Once you configure your computer with this utility, you
PSB No: S-0147
Page: 7 of 9