Epson ExpressStation Product Support Bulletin page 5

Page Two
VGA/EGA, CGA40, CGA80, MONO or not installed
56/60 or 72 HZ.
Interlaced 44/88 HZ.
Non Interlaced 60 HZ. or 72 HZ.
Note that if you change this setting, you must reboot the computer in order
for the change to take effect.
primary/secondary
installed/not installed
no/yes
installed/not installed
Page Three
enabled/disabled
displays the size of base memory in KB. This size will differ from what you
set in Base Memory Above 512K only if there is a failure in base memory.
displays the amount of memory in the system above 1 MB. The memory
includes SIMMS on the system board and memory on add-in boards. You
cannot change this setting through setup.
enabled/disabled
enabled/disabled
disabled
Base Address 378H Compatible
Base Address 278H Compatible
Base Address 378H Bi-Directional
Base Address 278H Bi-Directional
PSB No: S-0147
Page: 4 of 9