Table of Contents
Advertisement
INSERTING THE MEDIA
Use either xD-Picture Card (sold separately) or CF/Microdrive (sold separately) as recording media
in the IS-1.
h If an xD-Picture Card and a CF/Microdrive are inserted at the same time, images will be
recorded onto the media selected as the "
h Data cannot be copied between the two media types on the IS-1.
1
0
1
2
0
2
xD-Picture Card
Gold
contact
area
Gold marking
Align the gold marking on the xD-Picture
Card slot with the gold contact area on
the xD-Picture Card and push the card
firmly all the way into the slot.
●
!
Insert only the appropriate media types into the xD-Picture Card and CF/Microdrive slots. Inserting the incorrect
media will damage the camera or media.
●
!
If the media is oriented incorrectly, it will not go all the way into the slot. Do not apply force when inserting an
xD-Picture Card or a CF/Microdrive.
●
!
If the media is not fully inserted into the slot, [CARD ERROR] appears.
3
14
¡
" MEDIA (➡P.100).
1 Set the Power switch to "OFF".
2 Open the slot cover.
●
!
If opening the slot cover while the camera is still on, the
camera will turn off.
Do not open the slot cover while the camera is on.
This could damage the media or ruin the image
files on the media.
CF/Microdrive
Push the CF/Microdrive firmly all the way
into the CF/Microdrive slot.
Compatibility is listed on Fujifilm website:
http://www.fujifilm.com/products/digital/
Close the slot cover.
◆
How to replace
◆
the xD-Picture Card
Push the xD-Picture Card into the slot and
then slowly remove your finger. The lock is
released and the xD-Picture Card is pushed
out.
Checking the battery charge
Turn the camera on and check the battery charge.
1
No icon
2
Lit red
3
Blinking red
6 6
N N N
Lit red
Blinking red
●
!
Depending on the camera mode and the type of batteries used, the transition from "
quickly.
●
!
Due to the nature of the battery, the battery level warning may appear early when the camera is used in cold
locations. This is normal. Try warming the batteries in your pocket or a similar location before use.
✽ Battery level warning
1) The camera's estimation of the remaining battery charge varies greatly depending on the camera operation mode.
Consequently, even if "
C
" or "
V
" is not displayed in Playback mode, one of them may appear when you change
to Photography mode.
2) Depending on the battery type and the level of charge in the batteries, the camera may run out of power without first
displaying a battery level warning. This is particularly likely to happen when batteries that have run out of charge
once are re-used.
In situation 2), immediately load new or fully charged replacement batteries.
◆
◆
Auto power off function
If the camera is left unused for 2 or 5 minutes, the Auto power off function turns the camera off (➡P.104).
To turn the camera back on, set the Power switch to "OFF" briefly and then back to "
◆
How to replace
◆
the CF/Microdrive
CF / Microdrive eject button
Open the slot cover, press the CF/Microdrive
eject button and remove the CF/Microdrive.
●
!
When storing CF/Microdrives, always use the
special protective case.
1 There is ample battery charge.
2 There is insufficient charge left in the batteries.
The batteries will soon run out. Have a new set
of batteries ready.
3 The batteries are depleted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
C
"
" appears as a small icon on the left-hand side
V
of the screen. "
" appears as a large icon in the
center of the screen.
C
" to "
V
" may occur more
q
w
" or "
".
1
15
Advertisement
Table of Contents
