Small Form Factor Computer - Dell OptiPlex GX520 Quick Reference Manual

Small Form Factor Computer

NOTICE:
metal surface. While you work, periodically touch an unpainted metal surface to dissipate any static
electricity that could harm internal components.
1 Follow the procedures in "Before You Begin" on page 18.
2 If you have installed a padlock through the padlock ring on the back panel, remove the padlock.
3 Slide the cover release latch back as you lift the cover.
4 Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage
points.
5 Remove the cover from the hinge tabs and set it aside on a clean, nonabrasive surface.
22
Quick Reference Guide
Before touching anything inside your computer, ground yourself by touching an unpainted
4
1 security cable slot
2 cover release latch
3 padlock ring
4 computer cover
1
2
3