Networking Basics; Check Your Ip Address; Windows ® Xp/000 Users; Windows Vista ™ Users - D-Link RangeBooster G WDA-2320 User Manual

Appendix B - Networking Basics

Check your IP address

After you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings should be
set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please follow the steps below.
Windows XP/2000 Users
®
• Click on Start > Run. In the run box type cmd and click OK.
• At the prompt, type ipconfig and press Enter.
• This will display the IP address, subnet mask, and the default gateway of your adapter.
Windows Vista Users
™
• Click Start > All Programs > Accessories > Command Prompt. You may need
administrative access to run this application.
• For all additional prompt windows inquiring of running the command prompt application,
select Yes, OK, or Continue.
• At the prompt, type ipconfig and press Enter.
• This will display the IP address, subnet mask, and default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a
DHCP request on newly installed adapters.
D-Link WDA-30 User Manual

Networking Basics

70