D-Link RangeBooster G WDA-2320 User Manual page 64

Section 5 - Troubleshooting
• In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the
settings for the wireless clients and access points. The SSID factory default setting for D-Link
products is default.
• Check that the Network Connection for the wireless client is configured properly. Select AP
(Infrastructure) when connecting to an access point. Double-click on the WLAN icon in the taskbar > click on
Configuration to
change the settings for the wireless adapter.
• If Security is enabled, make sure that the correct encryption keys are entered on both the WDA-30
and the access point. Double-click on the WLAN icon in the taskbar > click Encryption. Check
to see that the key selected is set to the same key as other devices on the network.
7. How can I troubleshoot distance issues using the WDA-2320?
• Move the WDA-30 and Access Point or Wireless router into the same room and then test the
wireless connection.
• Change the channel of the Access Point.
• Move devices within the line of sight.
D-Link WDA-30 User Manual 64