Connect To A Wireless Network; Using Windows ® Xp - D-Link RangeBooster G WDA-2320 User Manual

Section 3 - Configuration

Connect to a Wireless Network

Using Windows XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack
®
 users. If you are using another company's utility or Windows 000, please refer to the user manual of your wireless adapter for
®
help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows XP utility as seen
®
below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available Wireless
Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics
section in this manual for more information.
D-Link WDA-30 User Manual 45