Table of Contents
Advertisement
Parameter
Aut hentication Mode
WEP Encryption Key Setting
WPA Encryption Setting
Profile
Profile Name
Load
Save Current
Delete
Other
Advanced Setting...
Information
Description
This setting has to be consistent with the wireless networks that
the adapter intends to connect.
Open System – No aut hentication is needed among the wireless
network.
Shared Key – Only wireless stations using a shared key (WEP
Key identified) are allowed to connect each ot her.
Auto – Auto switch the aut hentication algorit hm depending on the
wireless networks that the adapter is connecting to.
Click t his button to setup the WEP key. Please refer to Section
6.3 for the details.
Click t his button to setup the WPA f unction. Please refer to
Section 6.3 for the details.
You can save the network setting as a profile. To connect to the
network without making additional configuration, you can load the
profile.
Load the setting values from the file in the "Profile Name" list. The
new settings will be activated immediately.
Input a file name and click "Save Current" to write the current
setting values to be a profile in the "Profile Name" list.
Delete the profile you select.
For more advanced setting, please click it. To know more of the
setting, please refer to Section 6.4.
To view the version of the driver, firmware and the MAC Address
of the adapter, click the button.
16
Advertisement
Table of Contents
