D-Link DWL-3260AP - AirPremier - Wireless Access Point User Manual page 48

Console Settings
Status: Status is Enabled by default. Uncheck the box to disable the
Console Protocol: Select the type of protocol you would like to use, Telnet or SSH.
SNMP Settings
Status: Status is Enabled by default. Uncheck the box to disable the SNMP
Public Community
String:
Private Community
String:
External LED Indicators
Default: The LED is ON by default. Uncheck the box to disable the LED
Status: When the LED is turned ON, there are two status: steady ON when
console.
functions.
Enter the public SNMP community string.
Enter the private SNMP community string.
indicator.
link is ok, blinking when there is traffic.
Using the Configuration Menu
4