D-Link DWL-3260AP - AirPremier - Wireless Access Point User Manual page 15

Using the Configuration Menu
Home > Basic Settings > Wireless
Wireless Band: IEEE 802.11g
Access Point is selected from the pull-down menu.
Mode:
Service Set Identifier (SSID) is the name designated for a specific
SSID:
wireless local area network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
The SSID can be up to 32 characters and is case-sensitive.
SSID Broadcast: Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Auto Channel Scan is set by default. All devices on the network
Channel:
must share the same channel. To change the channel, uncheck Auto
Channel Scan. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
15