Section - Using the Configuration Menu
Authentication:
For Open System authentication, only
the wireless clients with the same WEP
key will be able to communicate on
the wireless network. The bridge will
remain visible to all devices on the
network.
Encryption:
Select Enabled to enable WEP
encryption.
Key Type:
Select HEX or ASCII.
Key Size:
Select 64 Bits or 128 Bits.
Valid Key:
Select the 1st through the 4th key to
be the active key.
First through
Input up to four keys for encryption.
Fourth Key:
You will select one of these keys in the
valid key field.
Note: Hexadecimal digits consist of the numbers 0-9 and the letters A-F.
ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers
0-127.
D-Link DWL-3150 User Manual
Open System (64 Bits or 128 Bits)
3