Using The Configuration Menu - D-Link DWL-3150 User Manual

Section 3 - Configuration
To configure the DWL-3150, use a computer which is connected to the DWL-3150 with an Ethernet cable (see the
Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel >
Internet Options > Connections > LAN Settings and uncheck the enable box.
Open a web browser such as Internet Explorer and Type the IP address and http
port of the DWL-3150 in the address field (http://192.168.0.50) and press Enter.
Make sure that the IP addresses of the DWL-3150 and your computer are in the
same subnet.
After the connection is established, you will see the user identification window as shown.
Note: If you have changed the default IP address assigned to the DWL-3150, make sure to enter the correct IP
address.
Note: If you have changed the password, make sure to enter the correct password.
D-Link DWL-3150 User Manual

Using the Configuration Menu

Type admin in the User Name field
•
Leave the Password field blank
•
Click OK
•
10