Dns Proxying For Wireless Clients; Differences In Dhcp Server For V1 Access Points - NETGEAR WG302v1 - ProSafe 802.11g Wireless Access Point Configuration

Application notes - using the dhcp server feature

Hide thumbs Also See for WG302v1 - ProSafe 802.11g Wireless Access Point:

Table of Contents

Wireless clients connect to the WG302v2/WAG302v2 will receive one of the addresses from the

DHCP pool. However, DNS Server address assigned to the wireless client will always be the

same address as the default gateway address. It was because the WG302v2/WAG302v2 uses

DNS proxying. The wireless client's DNS requests are sendt to the access point then proxy to the

designated DNS Server specified in the DHCP setting.

This is specific for v2 of WG302 and WAG302. WG302v1 and WAG302v1 DHCP server works

differently. Refer to the reference manuals of WG302v1 and WAG302v1 on how to setup DHCP

server on those access points.

Table of Contents

Need help?

Do you have a question about the WG302v1 - ProSafe 802.11g Wireless Access Point and is the answer not in the manual?

Wg302v2 Wag302v2