Troubleshooting - 3Com 3CRWX315075A - Wireless LAN Managed Access Point 3150 Quick Start Manual

Recovery to Managed Mode
If there is a problem with your access point you may need to reset it to Managed mode.
1
Before you begin, download the latest software AP3150 software image from
www.3Com.com.
2
Shut down the access point by disconnecting power.
3
Press and hold the Reset button. Reconnect power and continue to hold the Reset button for
20 seconds. Your access point will restart in Recovery mode.
4
Connect to access point using the a web browser and the default IP address of
169.254.2.251. When you connect to the unit, the Access Point Recovery Page is
displayed:
5
Click the Browse button and navigate to the access point software image file.
6
Click Start Upgrade to update your access point.
7
When the update is complete, click Change Mode to switch the access point to Managed
mode.
8
Click the Reset button on the Recovery Page to reboot your access point.

Troubleshooting

Refer to the Mobility System Configuration Guide or to the 3Com Wireless LAN Switch Reference
Manual to obtain the access point status.
10