Table of Contents
Advertisement
R
In the Ethernet Client List page, click Reset Statistics to set the # Transmitted
Packets and # Received Packets listings back to zero.
C
You can clear the client list manually by clicking Reset Clients in the Ethernet
Client List page.
The bridge erases the client list. Thereafter, clients are added to the list
automatically when they next interact with the network.
V
C
IEWING
ONNECTION
Under System Status, click Connection Status to see information about the quality
of the wireless association.
Data rate values (1, 2, 5.5, or 11 Mbps) indicate the speed of data transfer. A data
rate of 0 indicates no data transfer.
Signal strength values in the RSSI field range from 0 (no signal) to 100 (excellent
signal quality). A signal strength of 30 is good; a value of 40 or greater is very
good.
Click Refresh to update the information.
V
IEWING THE
Under System Status, click System Summary to see information about the bridge.
You can go to the configuration pages of items that can be configured by
clicking their names in the list.
Click Refresh to update the information.
I
NTEROPERATING WITH
Because 3Com Wireless LAN equipment complies with IEEE 802.11b standards, it
can interoperate with third-party equipment that also complies with the
standards. However, some third party equipment may not support 3Com
enhanced performance features. You may need to turn off the Network Traffic
Accelerator and set the Data Preamble to long to support this equipment on
the network.
S
ESETTING
TATISTICS
C
LEARING THE
LIENT
S
TATUS
S
S
YSTEM
UMMARY
T
HIRD
L
ISTINGS
L
IST
-P
E
ARTY
QUIPMENT
37
Advertisement
Table of Contents
