Installing the DVC Storage Driver
●
When Uninstalling the DVC Storage Driver
If DVC Storage Driver installation has not been done correctly, or when
otherwise necessary, uninstall the driver.
1.
Connect the Power Adapter to the camcorder.
2.
Connect the camcorder to the computer using the supplied
USB cable (
3.
Slide the POWER switch to PLAY(VCR) and the TAPE/CARD
switch to CARD.
4.
On the [Start] menu, select [Control Panel (C)].
5.
Select [Performance and Maintenance] e [System].
6.
Click the [Hardware] tab in the [System Properties] dialog.
7.
Click [Device Manager].
8.
Check if [Canon DVC] or [USB device] is displayed under
[Other devices], [Imaging devices] or [Universal Serial Bus
controllers].
• If [Canon DVC] or [USB device] is found:
1. Right-click [Canon DVC] or [USB device] and select [Uninstall].
2. If a confirmation message appears, click [OK] and close [Device
Manager] and [System Properties].
• If there are multiple [Canon DVC] or [USB device] entries under
[Other devices], [Imaging devices] or [Universal Serial Bus
controllers], delete all of them.
30
Windows XP
32).
Click here