Troubleshooting - Canon 7920A001 - GL 2 Camcorder Instruction Manual

Troubleshooting

? Can't download images or camcorder is not recognized when the
camcorder is connected via the USB interface.
➜ Computer doesn't support the USB interface.
The USB interface is not supported for computers not in compliance with
the following requirements. Acquire the necessary system to use the USB
interface.
Requirements
• Built-in USB interface on a system preinstalled with one of Windows 98/
Windows Me/Windows 2000/Windows XP.
➜ [From Canon Camera] is selected on the browser window.
Change the selection to [From CANON_DV H:\Dcim. (The drive letter (e.g.
"H:") varies depending on the computer you are using.)
➜ There is no memory card in the camcorder.
Insert a memory card into the camcorder.
➜ The camcorder is not set to the correct mode.
Slide the POWER switch to PLAY (VCR) and the TAPE/CARD switch to CARD.
➜ Camcorder is not correctly connected to the computer.
Read "Connecting the Camcorder to a Computer" (
connection.
Ensure that you are using the correct cable and that its connectors are in
good shape.
➜ If you are experiencing operational problems, detach the USB cable
from the camcorder and computer and terminate the connection.
Restart the computer and then reconnect the camcorder.
➜ DVC Storage Driver is not installed properly.
First uninstall the DVC Storage Driver and then reinstall it. To learn how to
uninstall it, see "Uninstalling the DVC Storage Driver". To learn how to
install it, see "Installing the DVC Storage Driver".
? Can't install the DVC Storage Driver correctly.
First, Check the Following
➜ Does the system have a built-in USB port and did it come with
Windows 98 (First or Second Edition), Windows Me, Windows 2000,
or Windows XP preinstalled?
(The USB interface is not supported for systems not complying with the
above conditions.)
➜ Is the camcorder correctly connected to the computer?
➜ Are you using the AC power adapter to power the camcorder?
• If the Problem Is Not Mentioned Above
If the DVC Storage Driver has not correctly installed, Windows may not
recognize the DVC Storage Driver. Uninstall the DVC Storage Driver
according to the instructions and reinstall the DVC Storage Driver.
32) and check the
E
51